MIL-STD-810G军标测试(4)

截取了MIL-STD-810G的可用于手机可靠性测试程序和实验条件,适用于三防手机的MIL认证.

Procedure II Aggravated Cycle 30℃~60℃ 95%RH,10days Figure 507.5-7 and Table 507.5-IX

Procedure I - Blowing Dust.(< 150 μm). Dust composition.:140 mesh Silica Flour(100 percent less than 150μm, 50 percent of 20 ±5 μm. ) 6 hours at standard ambient temperature, and an additional 6 hours at the high temperature (Basic hot 43℃) same as IP6X

Procedure I -Immersion Depth of complete immersion:1± 0.1m(measured from the uppermost surface of the test item to the surface of the water) Duration of immersion:30 minute 10° C above the water temperature(normal water temperature,Standard Ambient)

Procedure I - General vibration. Category 4 - Truck/Trailer - Secured Cargo. 1. Truck transportation over US highways ---refer to Figure 514.6C-1 and Table 514.6C-II. 2.Exposure durations. 60 minutes per axis

Procedure I - General vibration. Category 8 - Aircraft - propeller. Exposure durations: one hour per axis

Procedure III - Fragility. 1.Trapezoidal shock pulse 2.Drop height (h):76cm 3.maximum acceleration level (Am):15g's. 4.one shock per axis Please refer to Figure 516.6-11

百度搜索“70edu”或“70教育网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，70教育网，提供经典综合文库MIL-STD-810G军标测试(4)在线全文阅读。