没有被分摊的四个原因 一. 库存覆盖范围检查
CKMLPP-PBPOPO 收据: 期间中后继调整的数量 > 累计库存数量，如果依然想把这部分差异分摊，那么在 CKMVFM里将价格 限制逻辑去掉
Base quantity for stock coverage check, that is cumulated from all operations that result in a value-only posting
without quantity (forexample material debits/credits, subsequent adjustments from invoices or account maintenance). If
no stock coverage is given, the Not Distributed line appears in the material price analysis.
比如MR22/采购订单后续差异输入/生产订单结算，实际上是不影响库存数量的，但是调整时可以输入一个数量，如果这个调
整数量>累计的库存数量，那么他们的差异数量（调整数量-库存数量）部分的差异价值就会被放在”没有被分摊“中
在CKMLCP的单层价格确定参数里，可以将”不含库存覆盖范围检查的价格确定“勾上。If you set this indicator, then there is
no stock coverage check for single-level price determination.
可能会引起价格突变，最好是先不勾上，分析原因是否合理，排除错误因素后，再勾上运行！
二.避免PUP为负
fallback strategy：\
As a solution, you might check the postings of these materials if they really need to have such big negative price
differences or if there is some kind of error in the posting or the production structure. If you find such errors, you might
reverse the corresponding postings and post them in a correct way.
Or, you might use transaction MR22 (debit/credit material) in order to post an appropriate positive amount of differences
to the concerned materials so that the resulting actual price would no longer be negative. This allows to perform the
period closing regularly. In the next period, you might remove this manual posted value from the materials (again with
MR22) in order to correct the overall stock values back to their original amounts. （如果负差异很大为正常情况，可以考虑
用MR22输入一个正差异调整，下月再用MR22输入一个负差异调整回来） (一） Fallback strategy when price is negative (one-way step) It following cases
a.that the quantity of the \
b.or that the price determined is negative. For example, because a very large credit is posted into category
\
In these cases the system cannot determine a price or it cannot determine an allowed price. The system therefore
must use another calculation line instead of the cumulative inventory. This usage of another
calculation line is called
\
1. First, the system uses category \as the calculation line. In this case the system generates message: C+135.
2. If the price based on the receipt quantity is also negative or if the receipt quantity is zero, the system uses category
\3. If the price based on the beginning inventory is also negative or if the beginning inventory quantity is zero, the system
uses the periodic unit price of the previous period as the new price. In this case the system generates message: C+136.
4. If the material for the previous period did not yet have any periodic unit price, the system uses the standard price of
the current period as the new periodic unit price. In this case the system generates message: C+137.
如果期初库存为负，累计差异=期初差异+本期收据差异*（本期累计数量/本期收据数量）,然后PUP=（累计标准价值+累计差异 ）/累计数量
（二）Fallback strategy when price is negative (cycle)
The system issues error message C+723 and uses a fallback strategy. Here the following messages can be generated: CKMLMV034:
Cycle &1 will be recosted with the reduced actual BOM
If the price of a material that is in a cycle becomes negative, the fallback strategy described above cannot be carried out.
As an automatic fallback solution, all input materials that are also cycle materials are ignored. （三）Fallback strategy when value exceeds threshold (for one-way step) Here the following messages can be generated: CKMLMV020:
Step &1: Packet & 2 is first costed with the actual BOM CKMLMV018:
Step &1: Packet & 2 costed again with a reduced BOM CKMLMV021:
Multilevel price determination with a reduced actual BOM （四）Fallback strategy when value exceeds threshold (for cycle) Here the following messages can be generated: CKMLMV020:
Step &1: Packet & 2 is first costed with the actual BOM CKMLMV018:
Step &1: Packet & 2 costed again with a reduced BOM CKMLMV021:
Multilevel price determination with a reduced actual BOM （五）Fallback strategy when cycle does not converge Here the following messages can be generated:
CKMLMV005:
Cycle &1 broken off after &2 repititions CKMLMV012:
Input material & 1 will be removed for the iteration (process &2) 三. 执行了CKMM.
When transaction CKMM is processed the system deletes the price differences for the material in the period and these
differences are not longer in the period record tables. CKMM会将差异删除，这些差异将不再被记录到物料分类帐记帐表里，
放在了CKM3的没有被分摊里，这是CKM3显示错误，因为显示在CKM3里的“没有被分摊”在期间里是没有记录的了。
The fact is that the price differences are still visible in CKM3 (as not distributed). This is due to the missing reset of
summarization records (MLCD).
This error is just a problem of CKM3 display, because the differences shown as 'not distributed' do not exist in the periodic
records. The PUPof the material is calculated correctly. See note 384553 for further details.（46C） The error is solved with note 838989: (Hotpackage 46C SAPKH46C51 470 SAPKH47025 500 SAPKH50010 600 SAPKH60001).
假设上线时，材差科目有很多余额，这些差异并未显示到CKM3里,要用MR22来初始化差异!
四. 价格修改结果 (LTPC).
In transaction CKM3 when a subsequent price change (LTPC) is carried out, the preliminary valuation and all differences
are rescaled at category level. Additionally, the corresponding lines for price change documents are sorted and flagged
with the text \
If a late price change is run with transaction MR21 and there were not a previous reversal of the consumptions already
posted in the period, these documents cannot be rescaled by transaction MR21.
Therefore transaction CKM3 will show a \correctly. This is then a display side-effect in CKM3.
不包括原因
A）多层结算未运行
检查物料状态，重新运行多层结算
订单未收货 (有输入和输出物料的业务才能将多层差异分配出去)
联产品未收货(主产品的物料主数据里维护了分摊比例，而联产品没有收货，因为ML是按主数据里的比例结转差异的，找不到联
产品的收货，那联产品应承担的那部份从下层结转来的差异，就会留在下层物料的不包括中，要将主产品物料主数据中的联产品
分摊比例中的联产品比例改为0，联产品就不接收差异了) B）没有运行消耗重估
4.7以后 激活Financials Extensions CKMLCP里就有消耗重估了 (物料转为费用的那部分差异分配出去)
C）WIP 重估没有运行 · The material ledger is active. · Actual Costing is active. This enables you to revaluate WIP materials at actual prices. · To be able to revaluate WIP activities at actual prices in ML instead of in OBJ, the following setting must be made:
In Customizing under Controlling ? Product Cost Controlling ? Actual Costing/Material Ledger ? Actual Costing ? Activate
Actual Costing, set the activity update indicator to 2 (Activity Update Relevant to Price Determination). · Activating WIP Revaluation
百度搜索“70edu”或“70教育网”即可找到本站免费阅读全部范文。收藏本站方便下次阅读，70教育网，提供经典综合文库物料分类帐 没有被分摊原因在线全文阅读。
相关推荐：
